Deeper color and locked joints for Fleming Island pavers
Paver Sealing in Fleming Island, FL
Bring back your paver color and keep the joints tight with help from Fleming Island Paver Sealing. Call (904) 682-0688
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligations.
Looking for paver sealing on Fleming Island?
Paver sealing brings back color and protects driveways, patios and pool decks. The work means cleaning the surface, refilling the joints with sand and applying a protective coat. In the Fleming Island area it commonly runs $1.50 to $2.50 per square foot.
Picture the driveway your guests see first with its color back, its joints full and no green in the corners. That is what a clean, sand and seal is meant to give you. To reach a contractor who does this work on Fleming Island, call (904) 682-0688. The estimate is free, and there is no obligation.
About this service
This website connects homeowners with independent exterior cleaning and paver companies. We do not perform the work ourselves. You send one request, it goes to one contractor who covers your area, and that company gives you the price. If that sounds easier than calling around, you can request a quote in about a minute.
Fleming Island Paver Sealing was set up for one purpose: to make it simple for homeowners around Fleming Island to find someone who seals pavers. Searching for a contractor usually means comparing a long list of names, leaving several messages and waiting to see who calls back. Here, one request does the job, which means less phone tag for you. For a quick start, call (904) 682-0688.
We also publish the information homeowners ask about most. That includes what sealing costs in this part of Florida, how water-based and solvent-based sealers differ and how often a surface needs attention. Reading it first means you can ask better questions when the contractor arrives. If you are ready now, request a quote.
A request takes four simple steps. You call or send the short form with your town and the surface that needs work. Your details go to one independent company that serves your area. The contractor reviews the surface, explains the sealer they use and gives you a price. If the price and the plan suit you, you schedule with the contractor directly.
Our services
Two services cover nearly every paver problem homeowners bring to us. Each has its own guide. Have a question about which one you need? Call (904) 682-0688.
Paver Sealing
Cleaning, joint sand and a protective coat in a matte or wet look finish, for driveways, walkways, patios and pool decks.
Learn more →Paver Cleaning and Joint Sand
Washing, algae and stain treatment and fresh joint sand, on its own or as the first stage of sealing.
Learn more →A complete sealing job has four parts. Surface cleaning removes algae, dirt and old residue so sealer bonds to the paver and not to the grime on top of it. Fresh sand goes back into the joints after washing, because lost sand is one reason pavers shift and weeds get a foothold. A water-based or solvent-based product goes on once the surface is dry, and that choice affects finish, odor and what can be applied later. Matte keeps a natural look, and wet look deepens color and adds shine, though it tends to show scuffs sooner.
Price follows square footage first, then condition. Here is what the per square foot rates Northeast Florida companies publish come to. A 300 square foot patio or walkway runs about $450 to $750. A 600 square foot two car driveway runs about $900 to $1,500. A 1,000 square foot large driveway or pool deck runs about $1,500 to $2,500. Treat those as a starting point, since condition and access change the final number. For a price on your own surface, request a quote.
Two things can change your plan. New pavers need time first. Unilock, a paver manufacturer, says to wait 60 to 90 days before sealing, which gives the white haze called efflorescence time to clear. Sunken or loose pavers should be fixed before any sealer goes on, since sealer locks in whatever is there. Mention either one when you call (904) 682-0688.
Where we service you
Requests are accepted from Fleming Island and nearby communities on both sides of Doctors Lake and the St. Johns River. That covers Clay, Duval and St. Johns counties. Each area has its own page with local notes. Not sure if you are covered? Call (904) 682-0688.
The Fleming Island community
Fleming Island sits on the west bank of the St. Johns River in Clay County, about 21 miles southwest of downtown Jacksonville and right off US 17. The area takes its name from George Fleming, an Irish settler who received a 1,000 acre land grant from the Spanish governor of East Florida. It became its own ZIP code, 32003, in 2004, and the 2020 census counted 29,142 residents, up from 27,126 a decade earlier.
Its planned communities include Fleming Island Plantation, Hawks Landing, Chatham Village, Fairway Village and Romeo Point, and paver driveways appear throughout local home listings. If your home is in a community with an association, check its architectural rules before changing the look of your pavers. A move from a natural finish to a high gloss wet look is the kind of change a board may want to review first. Have questions about your surface? You can request a quote and a contractor can talk it through.
Why choose us
There is no shortage of companies around Jacksonville that seal pavers. The point of this service is to save you the work of sorting through them. To try it, call (904) 682-0688.
One contractor, not a bidding list
Your request goes to one independent company that covers your area. That means you will not get a run of calls from several businesses chasing the same driveway.
No cost to homeowners
Using this website is free. Any price you pay is agreed directly with the contractor, and you are under no obligation to accept it.
Local pricing up front
You can see what Northeast Florida companies publish per square foot before you speak with anyone, so the first number you hear has context.
You stay in control
You decide whether to hire the contractor. See what to look for in a contractor, get the price in writing and take the time you need.
Common questions about sealing pavers
What does it cost to seal pavers in Fleming Island?
Companies serving Northeast Florida publish about $1.50 to $2.50 per square foot to clean, sand and seal. A 1,000 square foot driveway would land near $1,500 to $2,500. Repairs or stripping old sealer add to that.
How often should pavers be sealed in Florida?
Paver companies commonly quote a sealer life of two to five years. Sun, irrigation, shade and car traffic all change that number, so a driveway and a shaded pool deck on the same property can wear differently.
Is there a downside to sealing pavers?
Yes. Sealing is a repeat cost, and once a solvent-based sealer is down you generally have to stay with solvent-based products. A wet look finish also shows scuffs more than a matte finish does.
Can I seal my pavers myself?
You can buy sealer and do it yourself. The main risk is compatibility, since a water-based sealer cannot go on top of a solvent-based one. If you do not know what was used before, test a small area first or ask a contractor.
Does this website do the work?
No. We are a referral service. Your request goes to an independent contractor who serves your area, and that company gives you the quote and does the job.
Get in touch today for a free estimate
Ready to protect your pavers? Send one request and hear from one contractor who serves Fleming Island.
Free, no obligations